CHAPTER
10
Manual No. 016-3001-015 Rev. C 205
C hapter 10
Seed Blockage
Sensors
System Overview
With the optional seed blockage sensor system, the Viper Pro can be used to monitor seed or product flow
during seeding operations. If an obstruction is detected, the field computer will display information from the
sensors to help the operator quickly locate the obstruction.
The status of the seed blockage sensor system is displayed at the bottom of the Viper Pro display.
The field computer may be connected to two separate sensor loops with up to 120 sensors per loop to monitor
seed flow at a single distribution tower or individual openers across the drill depending upon the level of system
monitoring desired.
To Next Page
Loading...
