Appendix H
286 OmniSeed™ Viper Pro™ Installation & Operation Manual
Registration Tab
The Registration tab is used to register the Field Hub with the Slingshot web service and activate the various
features of wireless communication on the Viper Pro field computer.
Note: If the Field Hub has been registered previously, the Viper Pro will display the registration status
above the “Registration Code” button. Touching the “Registration Code” button will display the Re-
Registration Warning prompt below. To re-register the Field Hub, touch the “Yes” button and
proceed with the registration instructions to re-register the Field Hub.
To register:
1. Touch the Wireless Status icon on the Viper Pro main screen and select the Registration tab.
To Next Page
Loading...
