CHAPTER 4
38 RCM - Sprayer and Hawkeye® 2 Calibration and Operation Manual
RATE SELECTION
Use the drop-down option to select between the following options:
Predefined or Rx (Prescription). Use predefined application rate values or a prescription (Rx) map to input rate
changes.
UT Rate Entry. Use this setting when not using Rx or Predefined application rate maps. Input the rate directly into
the field.
DISPLAY SMOOTHING
The Display Smoothing feature allows the system to smooth the actual rate display during operation. When
enabled, the actual rate display will show the target rate as long as the actual rate is within ±10% of the target rate.
The actual rate will be displayed if the rate controller does not reach the control deadband within 10 seconds.
FEATURE UNLOCKS TAB
The Feature Unlocks tab allows the operator to review the status of optional features of the nozzle control system
or activate additional features using an activation key. Unlocked features are visible on the Feature Unlocks page.
NOTE: Contact a local Raven dealer for additional information regarding available features or to acquire
activation keys.
ENTER ACTIVATION KEYS
To access the Feature Unlocks tab:
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. Select the Tools Menu softkey along the right side of the display.
3. Select the Feature Unlocks tab along the top of the page.
4. Touch the Activation Key field and use the on-screen keyboard to enter the code purchased from your local
Raven dealer.
NOTE: Also displays features already unlocked for use with the RCM - Sprayer system.
RCM - Sprayer Menu Tools Menu Feature
Unlocks
UT Menu
To Next Page
Loading...