CHAPTER 6
44 RCM - Sprayer and Hawkeye® 2 Calibration and Operation Manual
UNIVERSAL TERMINAL DEFINITIONS
To access the RCM - Sprayer home screen, select the RCM - Sprayer Menu button on the UT Menu.
FIGURE 1. Home Page Displayed on a Raven Viper 4
UT WORKING SET MENU
The UT Working Set menu displays systems and components detected on the ISOBUS. Use the Working Set menu
to access these systems, including the RCM - Sprayer working set, and allows the operator to operate the system
and monitor performance of system operation.
NOTE: The UT working set menu may be shown differently on various Universal Terminal displays. Refer to
the specific display instructions for additional assistance with using the display or finding and using
ISOBUS systems, components, and features.
QUICK ACCESS SOFTKEYS
The softkeys displayed along the right side of the RCM - Sprayer working set allow quick access to commonly used
features, calibration settings, and options. Review the following sections for additional information about the RCM
- Sprayer softkeys:
HOME
Touch the Home softkey to quickly return to the Home page and access the primary RCM - Sprayer
operation information. Use these pages to monitor the Hawkeye® 2 system during field
operations.
RCM - Sprayer Menu Home Page
UT Menu
Working Set
Menu
Quick Access
Softkeys
RCM - Sprayer Home Page
To Next Page
Loading...