8
Manual No. 016-0171-391 61
Replacement Parts
CAN Integrated 1 to 40 oz./min. Pump
TABLE 1. Injection Pump (P/N 063-0173-103) Replacement Parts
Item Description Raven P/N Item Description Raven P/N
1.
Housing, 3/4” Injection Pump 107-0171-523
27.
Bolt, 1/4”-20 x 1” Carriage 311-0069-004
2.
Bearing, Piston 325-0000-018
28.
Nut, Nylon Lock 312-4000-057
3.
Piston, 3/4” Pump 107-0171-531
29.
Washer, #6 Lock 313-3000-007
4.
Pump Head, 3/4” 107-0171-526
30.
Washer, Flat 313-2300-009
5.
Modified Pump Head, 3/4” 019-0159-569
31.
Washer, #10 Lock 313-3000-014
6.
Motor 416-0000-040
32.
Washer, 1/4” Lock 313-3000-017
7.
Encoder 422-0000-096
33.
Screw, #4-40 x 1/2” Socket Head 311-0068-007
8.
Magnet Assembly 063-0171-977
34.
Screw, 1/4” x 20 x 1/4” Hex Head 311-0068-060
9.
Bearing Assembly 063-0172-501
35.
Screw, 1/4” - 20 x 3/4” Socket
Head
311-0073-066
10.
Node, Integrated Motor Control
CAN
063-0173-082
36.
Screw, #6 - 32 x 1/2” 311-0004-013
11.
Cartridge, Intake 063-0172-503
37.
Screw, #10 - 24 x 1-1/2” 311-0068-191
12.
Cartridge, Discharge 063-0172-504
38.
Screw 311-0004-040
13.
Transducer, Pressure (0-250 PSI) 422-0000-090
39.
O-Ring 219-0001-153
14.
Switch, Injection Vacuum 063-0171-035
40.
O-Ring 219-0002-015
15.
Switch, Flow Monitor 063-0171-979
41.
O-Ring 219-0003-045
16.
Key 107-0171-588
42.
O-Ring 219-0007-117
17.
Ball 321-0000-313
43.
Seal, Slipper 219-0000-125
18.
Spring 314-0000-012
44.
Sealant, Loctite
®
#242 Thread
222-1001-029
19.
Bracket, Sensor 106-0159-539
45.
Grease, Lubricating 222-0000-002
20.
Bracket, Pump Motor Mounting 107-0171-599
46.
Grease 222-1001-114
21.
Plug, 1/4” (NPT) Hex Pipe 333-0009-061
47.
Compound, Nickel Anti-Seize 222-1001-079
22.
Strap 107-0171-600
48.
Sealant, RectorSeal
®
222-1001-026
23.
Conduit, Convoluted 434-1001-016
49.
Label, Serial 041-0159-710
24.
Tie, Cable 435-1000-002
50.
Label, 1 to 40 oz./min Injection
System
041-0159-806
25.
Tie, 8” Screw Mount 435-1000-030
51.
Tie, Cable 435-1000-005
26.
Elbow, Stainless Steel Street 333-0007-041
52.
Label, Node Number 041-0159-840