CHAPTER 3
8 RCM - Sprayer with Sidekick Pro™ ICD Ratio Rate Quick Installation Reference
• Mount the Sidekick Pro™ ICD in a location which provides access to the pump and ECU to simplify calibration
and troubleshooting.
NOTE: Length of cabling may dictate available mounting locations. The following figures offer some
examples of how to mount the Sidekick Pro™ ICD injection module.
FIGURE 3. Sidekick Pro™ ICD Injection Module
FIGURE 4. 90° Push-In Fitting
Insert 8mm tube (P/N 333-0014-005) at the push-in fitting and connect to the point of injection at the mixer.
90° Push-In 8xR1/2
(P/N 333-0014-002)
90° Push-In 8xR1/2
(P/N 333-0014-001)
To Point of Injection
To Next Page
Loading...
