Raven Sidekick Pro - Page 16

CHAPTER 3
14 RCM - Sprayer with Sidekick Pro™ ICD Ratio Rate Quick Installation Reference
FIGURE 12. Recirculation with 2-Way Valve on Sprayer
1. Ensure mounted valves are in the pass-through direction when there is no voltage connected. This will allow
the sprayer to function conventionally when the injection pump is not used and avoid circulating injected
chemical back to the main carrier tank.
FIGURE 13. Mixer and Valves Mounted Near Sprayer Boom
In Out
Recirculation
Pump
3-Way
Inlet Valve
Flow
Meter
Mixer
Spray Boom
3-Way
Outlet Valve
Point of
Injection
2-Way Valve
Raven Mixer
(P/N 063-0173-737)
3-Way Inlet Valve
Raven Check Valve
Pressure Sensor
Recirculation Pump
3-Way Outlet Valve
Check Valve
Flow Meter