Chapter 3
10 Slingshot™ Base Station Installation Manual
Fixing the Base Station Location
After the initial installation and convergence, the Slingshot base station will continue to broadcast corrections to
the Slingshot server in a demonstration mode. This mode is adequate for conducting client demonstrations of
the Slingshot system and will provide RTK level corrections to any subscribers so clients may begin using RTK
guidance from the Slingshot base station immediately.
To provide the best possible corrections over time, the Slingshot base station position should be surveyed and
set to a fixed operation mode. The Raven Network Operations Center will assist with this transition to process
the base station location, fix the position and permanently program the location into the base station.
To Next Page
Loading...
