23
5) RATE CHANGE ALARM ON/OFF
a) Display will show
RATE CHANGE ALARM ON
.
b) Depressing momentarily changes the display between
RATE CHANGE
ARLAM ON
and
OFF
. A value of
ON
means alarm is enabled; a value of
OFF
means alarm is disabled.
c) Momentarily depress to advance to GPS FILE REFERENCE.
6) GPS FILE REFERENCE
a) Display will show
GPS FILE REF 1
.
b) Enter the GPS file number
c) Momentarily depress to advance to GPS OPTIONS.
7) GPS OPTIONS
a) GPS is inactive when the display shows
GPS INACTIVE
. The GPS features
are explained further in the GRID APPLICATION SYSTEM MANUAL.
b) Momentarily depress to advance to FIELD REFERENCE.
8) FIELD REFERENCE
a) Display will show
FIELD REF 0
.
b) Enter the field number.
c) Momentarily depress to advance to BAUD RATE.
9) BAUD RATE
a) Display will show
BAUD RATE 9600
.
b) Depressing momentarily changes the display between
BAUD RATE 9600
and
1200
.
c) Momentarily depress to advance to DATA LOGGER TRIGGER VALUE.
NOTE: The TRIGGER VALUE default value is "zero". This value must be changed
to a desired number ranging from 1-9999. The DATA LOGGER features will
not work if this number is not changed.
10) DATA LOGGER TRIGGER VALUE
a) Display will show
DATA LOG TRIGGER VALUE 0
.
b) Enter the TRIGGER VALUE.
c) Momentarily depress to advance to DATA LOGGER TRIGGER UNITS.
To Next Page
Loading...
