13
Guidance (A-B) Lines
Use the following steps to set an A-B Line.
1. With the Guide tab selected, touch the Set A button.
An A-B Line may also be set by entering a compass heading. Touch the Set B
by Heading icon at the bottom of the guidance display to enter an A-B Line
heading.
2. When the Set B button appears, touch the button to set the B point of the A-B
Line. The set A-B Line appears on the screen in blue.
To save the currently displayed A-B Line:
1. With the Guide tab selected, touch the Guide Menu icon.
2. Touch the Save A-B button and follow the on-screen instructions to save the
displayed Guidance path.
To load a saved A-B Line:
1. Reset any currently displayed Guidance paths.
2. With the Guide tab selected, touch the Guide Menu icon.
3. Touch the Load A-B button and follow the on-screen instructions to load a
selected Guidance path.
To Next Page
Loading...
