Raven Viper Pro - Generation 1 Cable Connections

16
GPS
1. Select Menu, Setup, and Comm Ports.
2. Select the appropriate GPS setting.
• Select Raven GPS when connected to all Raven GPS receivers, except for
the RPR 400, RPR 410, and the Phoenix 300, or when not using the guidance
in the Viper Pro to control a SmarTrax/SmartSteer system.
• Select Generic GPS, when connected to a Raven RPR 400, RPR 410,
Phoenix 300, Non-Raven GPS receivers or when the Viper Pro is providing
guidance to a SmarTrax/SmartSteer system.
3. Touch OK.