Chapter 5
108 Viper Pro Installation & Operation Manual
18. After the last ingredient in the chemical mixture is entered, touch the OK button. The following screen will be
displayed.
19. Select the View button to review the entered product mixture information.
Note: Refer to the Single Color Coverage Map section on page 107 for information on the “1 Color
Coverage Map” option.
20. Verify that the correct mixture information has been entered and touch the Next button to display the Report
Notes Information screen.
Report Notes Information
21. Use the Report Notes screen to enter any additional notes for the job report.
22. Use the Prev and Next buttons as necessary to review and modify the job report information before
touching OK to accept the displayed information and return to the Viper Pro main screen.
To Next Page
Loading...
