Appendix B
232 Viper Pro Installation & Operation Manual
TABLE 1. Boom Mapping Example
19. Touch OK to return to the Boom Setup Summary screen. Touch OK to save the displayed section settings
and return to the Viper Pro main screen or proceed to the
Advanced Section Setup
The standard boom setup covered in the Boom or Section Cal section on page 46 is sufficient for a standard
boom configuration with the sections end-to-end with no overlap or skips.
The advanced section settings allow the operator to customize boom or implement sections individually to
reflect specialized configurations with overlaps, skips or offset sections.
1. Select Menu, then Setup, and Boom.
2. Touch Next until the Boom Setup Summary screen is displayed.
Logical Wired As
Display
Character
11 L
22 1
33 2
44 3
55 4
66 5
79R
88 *
97 *
To Next Page
Loading...
