Installation: Mounting VSN 13
INSTALLATION
FIGURE 7. Installed Frame Support Arm
13. Install the camera mounting bracket (P/N 116-0159-834) to the VSN Visual Guidance rectangular mounting arm
(P/N 116-0159-846) using the provided M10 hardware.
a. Qty. 4 – 311-4051-224N – M10 x 30MM Bolt.
b. Qty. 8 – 313-6000-016N – M10 Flat Washer.
c. Qty. 4 – 312-6001-043N – M10 x 1.25 Nylock Nut.
FIGURE 8. Installed Camera Mounting Bracket
Camera Mounting
Bracket Installed on VSN
Rectangular Mounting
Arm
To Next Page
Loading...
