- 4 -
5. To install the handlebars, place the plastic
washer division on the designated position as
shown, and tighten the screws with a 4.0 allen
key. This will fix the handlebars in position.
6. Now the E-bike is assembled and ready to
be used.
5 6
B. Powering the Bike on and Riding
1 2
1. Unfold the bike and have it in riding position
in a stable and safe location
Unlock button
Power button
Lock button
Bell button
2. Press the unlock button on the remote
control and double click the power button to
turn on the bike, the front LED dashboard
should turn on.
To Next Page
Loading...