To Next PageTo Next Page
Need help?Do you have a question about the RaycoWylie i4300 and is the answer not in the manual?
General| Brand | RaycoWylie |
|---|---|
| Model | i4300 |
| Category | Monitor |
| Language | English |
Defines qualifications for technicians and the manual's scope.
Explains how to use the manual in conjunction with other documentation.
Details the process to enter the calibration menu using a password.
Explains how to configure system input/output settings.
Allows selection between metric and imperial units for calibration.
Details entry of critical data like rope limits and alarms.
Input of crane geometric dimensions for load calculation.
Sets capacities and weights for hook blocks.
Configures various system features like chart interpolation and password protection.
Allows setting the crane graphic displayed on the working window.
Sets the local date and time for accurate event logging.
Calibrates the angle sensor for zero reference.
Calibrates zero and span for the length sensor.
Calibrates pressure sensors for zero and span.
Calibrates the empty boom weight for main boom configurations.
Compensates for machine deflection with an empty hook.
Compensates for machine deflection with a suspended load.
Adjusts load reading for constant percentage errors.
Adjusts load reading for fixed load errors.
Compensates for jib deflection with/without load.
Adjusts jib load reading for constant percentage errors.
Adjusts jib load reading for fixed load errors.
Compensates for static pressure decay over time.
Backs up calibration data to a USB stick.
Restores calibration and load chart files from USB.
Initializes system memory and specific configuration memory.
Sets approach warning gaps for limits.
Manages user IDs and pass codes for system access.
Diagnostic tool for recording intermittent errors.
Summarizes lifts and ATB/bypass activations.
