EasyManua.ls Logo

Raymarine 150 - Connecting optional components

Raymarine 150
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 Type 150/400 Autopilot System: Installation Guide
Step 9
9.3 Connecting optional components
GyroPlus yaw sensor
The Type 150 and Type 400 course computers do not contain a
built-in GyroPlus, but you have the option of adding:
an external GyroPlus (part number: M81162)
or a dealer-fitted internal GyroPlus (part number: A18069)
Handheld remotes
You can connect handheld remotes to the autopilot system:
the ST600R remote control unit (part number: A12016) can act
as the sole pilot control unit in your system or as a full-function
remote for systems with other fixed pilot control units
the compact SeaTalk handheld remote (part number: A15002)
gives you full course control away from the main steering
position
External alarm
The autopilot system sounds an off-course alarm from all control
units. On large and/or noisy boats you can fit a Raymarine external
alarm (part number: Z035, connected though E85001 interface box)
as a high volume repeater.
Wind vane (sail boats)
The course computer can use wind angle information from a wind
vane or instrument to maintain a course relative to the wind. You can
provide wind angle information to the autopilot system by connecting
it to:
a suitable SeaTalk or NMEA instrument (providing wind angle
and speed information)
or
a Raymarine pushpit wind vane (part number: Z159) connected
through an interface box (part number: M81189)
Í
To install any of these options, refer to the information supplied with the
component.
81173_3.book Page 40 Thursday, June 7, 2001 11:51 AM

Table of Contents

Related product manuals