Raymarine A65 - Placing a Waypoint

Chapter 3: Working with Waypoints 47
3.2 Placing a Waypoint
A waypoint can be placed at the cursor position, the boat’s position or at a
position of you choosing (using lat/long coordinates). All waypoints can also be
used in the creation of routes.
When waypoints are placed they are given a default symbol and name. You can
change this default name or the symbol assigned to individual waypoints, if
desired. See “Editing a Waypoint“ on page 53.
... at the cursor
To place a waypoint at the cursor position:
1. Move the cursor to the desired position for the waypoint.
2. Press WPTS/MOB.
3. Press WAYPOINTAT CURSOR:
• A waypoint is placed at the cursor position with a default name and sym-
bol.
• The Edit Waypoint box is displayed, enabling you to change waypoint
details. For more information refer to “Editing a Waypoint“ on page 53.
4. To accept the default details press ENTER. The Waypoint List appears, dis-
playing your newly-created waypoint.
5. Press ENTER or CANCEL. The Waypoint List is removed.
... at current position
A
To place a waypoint at the vessel’s current position:
1. Press WPTS/MOB.
2. Press WAYPOINTAT VESSEL
• A waypoint is placed at your boat’s position.
WAYPOINT AT
CURSOR
WAYPOINT AT
VESSEL
WAYPOINT AT
POSITION...
GOTO WAYPOINT
OPTIONS...
REVIEW & EDIT
WAYPOINTS...
D8121-1
WPTS
MOB
WAYPOINT AT
CURSOR
D8078-1
WPTS
MOB
WAYPOINT AT
VESSEL
D8082-1