Chapter 4: Using the Chartplotter 69
4. When you arrive at the target waypoint an alarm sounds and a warning mes-
sage is displayed. To de-activate this alarm, press any key.
5. To stop navigating to the cursor, press STOP GOTO. The GOTO CURSOR way-
point is removed.
D8126-2
GOTO CURSOR
6.0nm North-Up (Relative Motion)
Csr Pos N 50°45.760 W 001°23.797 076°T 5.8nm
STOP GOTO
STOP GOTO
RESTART
TE
RESTART
TE
Bearing from Vessel to Destination:
dashed line marking actual
current course of GOTO (updated)
Bearing from Origin to Destination:
dashed line marking original
course of GOTO (unchanged)
Temporary Waypoint
placed at cursor
To Next Page
Loading...
