Raymarine A65 - Chapter 13: Waypoints, Routes, and Tracks

4.SelectRangeRingssothatOnishighlighted.
SelectingrangeringswillswitchrangeringsbetweenOnandOff.
SafeZoneRing
ThechartapplicationcandisplayandcongureaMARPA/AIS
safezonering.
ThesafezoneringsharesitscongurationwiththeRadar
applicationssafezonering,howevercanbedisplayed
independentlyofthesafezoneringintheRadarapplication.
IfaMARPAorAIStargetwillreachthesafezoneringwithinthe
timetosafezoneselectedanalarmissounded.
EnablingSafeZones
ToshowtheSafeZoneringfollowtheinstructionsbelow:
FromthechartapplicationgotoMenu>AISOptions>SafeZone
Set-up
FromtheradarapplicationgotoMenu>TrackTargets>Safe
ZoneSet-up
1.SelectSafeZoneRingsothatShowishighlighted.
SelectingSafeZoneRingwillswitchthezoneringfromhidden
tovisible.
2.SelectSafeZoneRadius.
i.Selecttherequiredradiusforthesafezone.
3.SelectTimetoSafeZone.
i.Selecttherequiredtimeperiod.
4.SelectAISAlarmsothatOnishighlighted.
SelectingAISAlarmwillswitchthedangeroustargetalarm
betweenOnandOff.
Fuelrangerings
Thefuelrangeringgivesanestimatedrangethatcanbereached
withtheestimatedfuelremainingon-board.
Thefuelrangeringcanbedisplayedgraphicallyinthechart
applicationandindicatesanestimatedrangethatcanbereached
withthe:
•Currentrateoffuelconsumption.
•Estimatedfuelremainingon-board.
•Courseremaininginastraightline.
•Currentspeedmaintained.
Note:
Thefuelrangeringisanestimatedrangethatcanbereached
atthecurrentrateoffuelconsumption,ofthefuelonboardand
basedonanumberofexternalfactorswhichcouldeitherextend
orshortentheprojectedrange.
Thisestimateisbasedondatareceivedfromexternalfuel
managementdevices,orviatheFuelManager.Itdoesnottake
intoaccountprevailingconditionssuchastide,current,seastate,
windetc.
Youshouldnotrelyonthefuelrangeringfeatureforaccurate
voyageplanningorinemergencyandsafetycriticalsituations.
Enablinganddisablingfuelrangering
Fromthechartapplication,in2Dview:
1.SelectMenu.
2.SelectPresentation.
3.SelectLayers.
4.SelectFuelRangeRing.
SelectingFuelRangeRingwillswitchthefunctionOnandOff.
3DDisplayOptions
Thefollowingoptionsareavailablewiththechartapplicationin3D
view:
•CentreOfView—Switchesacrosshaironandoffatthecentre
ofthescreenatsealevel.
•Exaggeration—Adjustingtheexaggerationhastheeffectof
verticallystretchingobjectsonthechart,makingiteasiertosee
theirshapeandposition.
•TransducerCone—Switchesonandoffatransducercone
indicatingthecoverageofashndertransducer.
•DepthScale—Switchesonandoffadepthscaleatyourvessel
position.
Enablingcentreofview
Toenablethecentreofviewcrosshairatsealevelfollowthesteps
below:
In3Dview:
1.SelectMenu.
2.SelectPresentation.
3.SelectLayers.
4.Select3DDisplayOptions.
5.SelectCentreofViewsothatOnishighlighted.
Selectingcentreofviewwillswitchthecrosshaironandoff.
Adjustingthe3Dchartexaggeration
Inthe3Dchartview:
1.SelectMenu.
2.SelectPresentation.
3.SelectLayers.
4.Select3DDisplayOptions.
5.SelectExaggeration.
TheExaggerationnumericadjustcontrolisdisplayed.
6.Adjustthenumericadjustcontroltotherequiredsetting,between
1.0and20.0
7.UsetheRotaryControltoadjusttheexaggerationtothe
requiredsettingbetween1.0and20.0.
8.SelectOktoconrmsettingandclosethenumericadjustcontrol.
Enablingtransducercone
Toenablethetransducerconetoindicatethecoverageofyour
shndertransducerfollowthestepsbelow:
In3Dview:
1.SelectMenu.
2.SelectPresentation.
3.SelectLayers.
Usingthechart
133