Raymarine A65 - Chapter 14: Chart Application

VRM/EBLcontextmenu
TheVRM/EBLfunctionincludesacontextmenuwhichprovides
positionaldataandmenuitems.
ThecontextmenuprovidespositionaldataoftheVRM/EBLin
relationtoyourvessel:
•Range
•Bearing
Thecontextmenualsoprovidethefollowingmenuitems:
•FloatCentre
•Adjust
•VRM/EBLOff
Accessingthecontextmenu
Youcanaccessthecontextmenubyfollowingthestepsbelow.
1.NeweSeriesorNewcSeries:
i.Selectingalocationortherelevantobjecton-screenand
pressingtheOkbutton.
2.Touchscreenmultifunctiondisplays:
i.Selectingandholdingonalocationorrelevantobject
on-screen.
CreatingaVRM/EBLontheradardisplay
TocreateaVRM/EBLonatouchscreenmultifunctiondisplayfollow
thestepsbelow:
Fromtheradarapplication:
1.Selectandholdonthescreen.
Theradarcontextmenuisdisplayed.
2.SelectPlaceVRM/EBL.
3.Selecttherequiredlocation/target.
TheVRM/EBLisnowsetattheselectedlocation.
CreatingaVRM/EBLontheradardisplay
Fromtheradarapplication:
1.Selectatargetorlocationonscreen.
2.PresstheOkbutton.
Theradarcontextmenuisdisplayed.
3.SelectPlaceVRM/EBL.
4.UsingtheJoystickadjusttheVRM/EBLtotherequiredbearing
andrange.
5.PresstheOkbuttontosavethesetting.
CreatingaoatingVRM/EBLontheradar
display
TooataVRM/EBLonatouchscreenmultifunctiondisplayfollow
thestepsbelow:
FromtheradarapplicationwithaVRM/EBLalreadycreated:
1.PressandholdontheVRM/EBL.
TheVRM/EBLcontextmenuisdisplayed.
2.SelectFloatCenter.
3.Selectthedesiredlocationforthecenterposition.
TheVRM/EBLisplacedatthenewlocation.
CreatingaoatingVRM/EBLontheradar
display
FromtheradarapplicationwithaVRM/EBLalreadycreated:
1.PositionthecursorovertheVRM/EBL.
2.PresstheOkbutton.
Theradarcontextmenuisdisplayed.
3.UsetheRotaryControltoselectFloatCenter.
4.PresstheOkbutton.
5.UsingtheJoystick,movethecenterpositionofthecircleto
thedesiredposition.
6.PresstheOkbuttontoconrmthenewposition.
UnoatingaVRM/EBLontheradardisplay
Tore-centeraVRM/EBLonatouchscreenmultifunctiondisplay
followthestepsbelow:
Fromtheradarapplication:
1.PositionthecursorovertheVRM/EBL.
TheRadarcontextmenuisdisplayed.
2.SelectCenter.
UnoatingaVRM/EBLontheradardisplay
Fromtheradarapplication:
1.PositionthecursorovertheVRM/EBL.
2.PresstheOkbutton.
TheVRM/EBLcontextmenuisdisplayed.
3.SelectCenter.
Usingtheradarrangerings
Radarrangeringsenableyoutomeasurethedistancebetween
twopointsontheradardisplay.
Usetherangeringstogaugetheapproximatedistancesbetween
points.Rangeringsareconcentriccirclesdisplayedonthescreen
andcentredfromyourvesselatpre-setdistances.Thenumberand
spacingoftheringschangesasyourangeinandout.
Examples:
D12214-1
D12215-1
D12216-1
Range—1/4nm
RangeRings—760ft
apart
Range—3/4nm
RangeRings—1/4nm
apart
Range—11/2nm
RangeRings—1/4nm
apart
Enablinganddisablingradarrangerings
Fromtheradarapplication:
1.SelectMENU.
2.SelectPresentation.
3.SelectRangeRings.
SelectingRangeringswillswitchtherangeringsOnandOff.
Usingradar
155