Raymarine AIS250 - 2.2 Items in the Box; 2.3 Tools Required

10 Raymarine Automatic Identification System Receiver
2.2 Items in the box
2.3 Tools required
AIS250 receiver module
Screw - N
O
8 x 3/4"
(4 x 20 mm)
5 ft. (1.5 m) Power cable
D10105_1
4 ft. (1.2 m) AIS to VHF Antenna connector cable
(x2)
Drill
1/4" (3.2mm)
Drill bit
Phillips
screwdriver
D10103_1
81286_2.book Page 10 Friday, December 5, 2008 2:29 PM