Raymarine C140w - Measuring Distances and Bearings

6.14Measuringdistancesandbearings
Youcanusethedatabarinformationandtherulertomeasure
distancesinthechartapplication.
Youcandeterminethedistanceandbearing:
•fromyourboattothepositionofthecursor;
•betweentwopointsonthechart.
Positioningthechartruler
Inthechartapplication:
1.Usingthetrackpad,positionthecursoratthestartpointofyour
measurementorbearing.
2.PresstheDATAbutton.
3.PresstheRULERsoftkey.
4.Usingthetrackpad,positionthecursorattheendpointofyour
measurementorbearing.Therangeandbearingisdisplayed.
5.PresstheOKbuttontoxthenewrulerposition.
Repositioningthechartruler
Inthechartapplication,withtherulerdisplayed:
1.PresstheADJUSTAorADJUSTBsoftkeytoselectthestart
orendpoint,asappropriate.
2.Usingthetrackpad,movethecursortothenewrulerposition.
3.PresstheOKbuttontoxthenewrulerposition.
Clearingthechartruler
Inthechartapplication:
1.PresstheDATAbutton.
2.PresstheRULERsoftkey.
3.PresstheCLEARRULERsoftkey.
84C-SeriesWidescreenuserreference