44 DSM300 Operation with PLUS Series Displays
3. Press ENTER or CLEAR.
The Sonar screen is displayed with its default soft keys. The associated half-
screen window soft keys are also displayed.
You can also set Windows On to split the display into two half-screen windows
(horizontal or vertical) to show supplementary data, or to display sonar and chart
or radar simultaneously. Split screen options are described in the following
sections.
Figure 4-1: Selecting the Display Mode
Horizontal Half-Screen Window Options
Using horizontal half screens, the main operating mode is displayed in the upper
window; you choose what is displayed in the lower window.
The following information, if available on your system, can be shown:
Table 4-1: Horizontal Half-Screen Window Options
Full-screen
mode
Horizontal Half-Screen
Window Options
Sonar Mode CDI, BDI, Depth/Temp, Chart, Radar
Chart Mode CDI, BDI, Nav Data, Radar, Sonar
SPLIT
HOR VER
BRG 099
o
R
RNG 2.410nm
CURSOR
60
0
0
ft
D6212-1
"DISPLAY" TO SELECT FULL SCREEN OPTION
SOFTKEYS TO SELECT WINDOW OPTION
CHART SONAR LOG
RADAR
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
SELECT
WINDOWS
WINDOWS
OFF ON
SPLIT
HOR VER
To Next Page
Loading...
