G-Series Reference Manual 38
4.3 Waypoint list
The details of all waypoints, irrespective of the application they
were created in, are stored in a dedicated waypoint list which holds
up to 3000 waypoints. All waypoints are placed in the MY WAY-
POINTS group by default. You can create new groups and change
the default group.
You can store waypoints on a CompactFlash card or transfer them
to other NMEA-compatible instruments. If the G-Series system
receives an active waypoint over SeaTalk or NMEA, it is displayed
but cannot be edited.
Waypoint lists can be password protected.
4.4 Placing waypoints
You can place a waypoint at:
• The cursor position
• Your vessel’s position
• A point specified by latitude and longitude or Loran TD
coordinates.
To Next Page
Loading...
