G-Series Reference Manual 40
• Change the waypoint group.
• Add a comment.
• Move a waypoint.
• Erase a waypoint.
• Change the default symbol and group of newly placed
waypoints.
Changing the waypoint name, symbol or group
When you create a waypoint, the system automatically assigns it a
name, symbol and group. You can change these details and add a
comment if required. This is particularly useful if you are managing
a large quantity of waypoints.
The default waypoint symbol is
X.
You can select different waypoint symbols to mark different types of
position (fish or dive locations, for example). When a waypoint is
active (being navigated to), the system highlights it by placing a red
box around it.
Alternative waypoint symbols available are shown below.
To edit waypoint details
1. Highlight the waypoint or select it in the waypoint list.
2. Press the VIEW AND EDIT DETAILS softkey.
3. Select the field you want to change and press the appropriate
softkey.
4. Make changes as required.
5. Press OK to save your changes.
Moving waypoints
Caution
Moving waypoints
If you move a waypoint that is used in a route, the new
position will be updated within that route. Ensure that
this does not present a navigation hazard.
To Next Page
Loading...
