Raymarine i70 - Setting the Compass Offset

metalitemsoritemsthatmaycauseinterference,
thenrepeatthecalibrationprocess.Ifyoustill
ndadeviationofmorethan15degrees,contact
yourRaymarinedealerforadvice.Ifthedeviation
iswithinacceptablelimits,pressCancel.
SettingtheCompassOffset
YoucanmanuallyapplyanoffsettotheCompass
headingbyfollowingthestepsbelow.
Toapplyanoffsetyourequireasourceofheading
suchastheship’scompass.
Fromthetransducersfoundpage:
1.EnsurethattheRudderiscentred
2.SelectiTC-5.
Alistofavailabletransducerdataisdisplayed.
3.SelectCompass.
4.SelectCompassOffset.
5.Steeryourvesselonasteadycourse.
6.UsetheUpandDownbuttonstoadjustthe
CompassOffsetuntilthedisplayedheading
matchestheheadingoftheship’scompass.
7.SelectSave.
52