4-37
Operation with a Full Function Handset
4.5 Menu Operation
The menu operation is used for making various settings and confirming
the current state. The operation is roughly divided in three functions as
follows:
FunctionFunction
FunctionFunction
Function
PurposePurpose
PurposePurpose
Purpose
1. NAVSTA Indicates the information input from NMEA.
2. DSC To register/modify various settings related to DSC.
3. SETTING To program the MMSI number.
4.5.1 Selecting the Menu Operation
To initiate the Menu function:
1. Press the FUNC key followed by the MENU key. Mn appears on the 7-
segment display and NAVSTAT is shown on the dot matrix display.
2. To scroll through these first level menu items, press the SQ UP/DOWN
key. The indicators alternate between NAVSTAT, DSC, and SETTING.
3. Select the desired operation and press the ENT key to enter that
particular menu item.
To exit the Menu operation, press and hold the CLR key for 3 seconds.
FUNC
+
MENU
To Next Page
Loading...
