101
Appendix A: Specifications
General
Mounting Bracket or flush mount
Size (H x W x D): Ray218
Flush Mounted
Bracket Mounted
3.84 x 7.79 x 7.06 in (97.5 x 198 x 179.3 mm)
4.43 x 8.76 x 7.06 in (112.5 x 222.5 x 179.3 mm)
Size (H x W x D): Ray55
Flush Mounted
Bracket Mounted
3.15 x 7.09 x 6.85 in (80 x 180 x 174 mm)
3.69 x 7.52 x 6.85 in (93.8 x 191 x 174 mm)
Weight, Ray218:
Transceiver
Microphone
3.5 lbs (1.59 kg)
0.4 lbs (0.181 kg)
Weight, Ray55:
Transceiver & Microphone 3.5 lbs (1.59 kg)
Weight, Raymic 0.5 lbs (0.227 kg)
Power 12 VDC system (13.6 VDC, typical)
Environmental:
Operating Range
Storage Range
Humidity
Waterproof to IPX7
–10°C to +50°C
–20°C to +70°C
up to 95%
Frequency Range:
Transmit:
Receive
156.050 to 157.425 MHz
156.050 to 163.275 MHz (including WX channels)
Oscillate Mode PLL
Modulation FM (16K0G3E)
DSC (16K0G2B)
Channel Spacing 25 kHz Increments
Frequency Stability +/- 10 PPM (+/- 0.001%)
Audio Output Power 5 watts, typical (at 10% distortion with 4 ohms load
Hailer Output Power: 30 watts @ 4 ohms (Ray218 only)
Antenna Port Impedance 50 ohms, typical
NMEA Port Impedance 100 ohms
External Speaker Impedance 4 ohms
Hailer Horn Impedance 4 ohms
To Next Page
Loading...
