32 Ray218 and Ray55 Marine VHF Radios
3.2 Transceiver LCD
The following describes the function of the characters on the radio’s LCD.
1. (RX) Receiving
Indicates that the radio is receiving a radio signal.
2. (TX) Transmitting
Indicates the PTT key is being pressed and the radio is transmitting.
3. (HI/LO) TX Power
Indicates whether transmit power is set for 25 watts (HI) or 1 watt (LO).
4. ATIS Active
Indicates ATIS transmission is enabled. Only available in European countries
using the International channel set.
5. (SAVED) Memory Mode
Indicates the current channel has been saved in memory. Appears during Saved
(Memory) Scan and Priority Saved Scan modes.
88
CH HAS BEEN
26 06.0098N
080 04.8589W
20:45UTC
COMMERCL
A
MAN
CH68
U
S
A
CH69 CH71
D9156-1
To Next Page
Loading...
