Chapter 4: Menu Settings 53
Channel Name
By default, the Ray218/Ray55 scrolls a descriptive name of up to 16 characters in
the line directly below the channel number and then stops to display a fixed
length of up to 9 characters. This option modifies the name for the currently-
selected channel from its default.
To change the Channel Name from the default:
1. From the VHF OPS menu, select
CHANNEL NAME.
2. Press EDIT. The name for the currently-selected channel appears.
3. Use the
CH/OK knob to modify the NAME field using the same technique
described in “Adding a new Entry“ on page 77.
4. Press DONE when completed.
To completely remove the Channel Name, press CLEAR in step 2 above. If the
name is deleted, the space below the channel number is blank for that channel.
72
SHIP/SHIP
B
B
VHF OPS
SELECT
U
S
A
72
SHIP/SHIP
B
B
CHANNEL NAME
BACK
SELECT CH
PRESS
EDIT OR
CLEAR
U
S
A
D9313-1
72
SHIP/SHIP
B
B
BACK
U
S
A
Select Characters
Press OK
EDIT CLEAR
72
SHIP/SHIP
B
B
EDIT NAME
CHANNEL NAME
PLEASURE
U
S
A
EDIT NAME
CHANNEL NAME
FISHING
BACK
DONE
26 06.0098N
080 04.8589W
AM10:33LOC
72
FISHING
B
B
U
S
A
CH06
CH67
CH17
HI/LO POWER
SAVE CHANNEL
WATCH MODE
FREQ BAND
CHANNEL NAME
To Next Page
Loading...
