3-66 Operations
4) When the desired call tone is heard, press the ENT key to accept. The
message CONT? Y is displayed.
5) Press the ENT key to register the changes.
To exit without making the changes, press the SQ UP/DOWN key until
DEL? N is displayed. Press the ENT key and operation returns to the mode
before the Menu operation began.
NameName
NameName
Name
SoundSound
SoundSound
Sound
Operating Siren in Fog/Siren ModeOperating Siren in Fog/Siren Mode
Operating Siren in Fog/Siren ModeOperating Siren in Fog/Siren Mode
Operating Siren in Fog/Siren Mode
CODENC1 “Hi-Lo” Press and release PTT switch to emit
continous sound. Press PTT again to
stop.
CODENC2 Siren Press and release PTT switch to emit
continuous sound. Press PTT again
to stop.
CODENC3 Whelp Press and hold PTT switch to emit sound.
Release PTT to stop.
CODENC4 Air Horn Press and hold PTT switch to emit sound.
Release PTT to stop.
ENT
ENT
Pressing ENT while "Y" is displayed stores
the selected siren and exits Menu mode.
Pressing ENT while "N" is displayed exits
Menu mode without changing the siren.
SQ UP/
DOWN
ENT
Pressing SQ UP/DOWN
changes the siren sound
To Next Page
Loading...
