Raymarine RAY53 - Network Connectivity

4.
7SeaTalkng®/NMEA2000
connection
Y ourproductcantransmitandreceivedatatoandfrom
devicesconnectedonSea Talkng®orNMEA2000CAN
busnetworks.Connectionisestablishedusingthe
SeaTalkng®connectorlocatedontherearoftheunit.
1.UsethesuppliedSea
Talkng®spurcabletoconnect
yourproducttoyourSea Talkng®network.
2.Y oucanalsouseaDeviceNettoSeaTalkng®
adaptorcable(notsupplied)toconnectyourproduct
toanavailablespuronaNMEA2000network.
Note:
1.Theproductmustbeconnectedtoacorrectly
terminatedbackbone .
2.Y oucannotconnectyourproductdirectlytoa
MFD.
3.Refertotheinstructionssuppliedwithyour
SeaTalkng®/NMEA2000devicefordetailson
creatingabackbone.
ConnectingSea
Talkng®cables
1.Rotatethelockingcollarsoitisintheunlocked
position.
2.Ensurethecable’sconnectoriscorrectlyoriented.
3.Fullyinsertthecableconnector.
4.Rotatelockingcollarclockwise(2clicks)untilitisin
thelockedposition.
4.8NMEA0183connection
TheNMEA0183wirescanbeusedtoconnecttheunit
toaNMEA0183GNSS(GPS)receiverorMFD.
1.Y
ellow=Receivepositive(+)wire
2.Green=Receivenegative(-)wire
3.White=Transmitpositive(+)wire
4.Brown=Transmitnegative(-)wire
TheNMEAwiresshouldbeconnectedtoacompatible
deviceasshowninthetablebelow:
NMEA0183wires
NMEA0183
device
Receivepositive(+)
to
Transmitpositive
(+)
Receivenegative(-)
to
Transmitnegative
(-)
Transmitpositive(+)
to
Receivepositive
(+)
Transmitnegative(-)
to
Receivenegative
(-)
Cablesandconnections37
81381-1-Ray53_63_73_Install_and_Ops_PRINT.pdf 37 6/13/2018 2:30:12 PM