40 Ray54 VHF Radio
7. Push in the CH knob to accept the selection.
8. Push the CH knob again to send the Group Call.
The Group Call is transmitted on channel 70, and then the radio tunes to
the designated working channel to be used for the Group Call.
9. Press PTT to communicate on the specified channel.
Receiving Group Calls
The Ray54 can receive Group Routine Calls from anyone in your
prearranged group.
When a Group Call is received, an alert tone sounds and the LCD alternates
screens displaying the group name and MMSI ID of the station initiating the
call and that a change of working channels is being requested.
➤ To silence the alert tone:
Press any key. Automatic cancellation takes place after 2 minutes.
To Next Page
Loading...
