Chapter 6: Menu Settings 77
6. Make your changes, using the CH knob using the same technique
described in Adding an Entr
y on page 59.
7. Press and hold the CH knob to accept your changes.
8. Press the CH knob to save. The revised entry appears in the list.
Position Reply
This option enables you to determine how your radio responds to a request
for your GPS position information (lat/lon) from another station.
➤ To enable/disable Position Reply:
1. From the DSC SETUP menu item described on page 71, rotate the CH knob
until the arrow points to POS REPLY.
2. Press the CH knob to accept.
To Next Page
Loading...
