Chapter 4: Menu Settings 57
Intercom
When a Raymic secondary handset is installed, Intercom operation enables voice
communications between the Raymic and the transceiver. You can initiate the call
from either the transceiver or second station. The following illustrates what is
displayed when the Ray218E transceiver initiates the call.
To initiate an Intercom call:
1. Select INTERCOM from the sending station (transceiver or Raymic):
Ray55E: Select INTERCOM directly from the main menu.
—or—
Ray218E: Select INTERCOM from the IC/HAIL/FOG menu.
—or—
Ray218E: Press and hold the
HAILER / INTCM key.
—or—
Raymic: Press and hold the
OK / INTCM key.
The receiving station sounds an alert tone and displays a message that
an intercom call is incoming.
2. On the receiving station, press
PTT to accept the call and respond.
While
PTT is depressed, that station displays TALKING and the other station
displays LISTENING. When neither station is pressing
PTT, both LCD’s display
PRESS PTT TO TALK.
3. On the sending station, when the LCD no longer reads TALKING, press
PTT to
talk.
4. To terminate the call, press END from either station.
D9436-2
09
SHIP/SHIP
B
I
N
T
HAIL/FOG/IC
SELECT
09
SHIP/SHIP
B
INTERCOM
CALLING
RAYMIC
CANCEL
09
SHIP/SHIP
B
INTERCOM
INCOMING
FROM
BASE
PRESS PTT
TO ACCEPT
CANCEL
on Transceiver on Raymic
I
N
T
I
N
T
HAILER
FOG
INTERCOM
[BACK]
To Next Page
Loading...
