1.Usingadrillanda4mm(5/32)drillbit,drilloutthe4mountingholes.
Holesshouldbedrilledfromthefrontoftheunit,takingcarenottoapplytoomuchforceto
thedrill.
P
anelmounting
Topanelmounttheradiofollowthestepsbelow.
Beforemountingtheproduct,ensurethatyouhave:
•Selectedasuitablelocation,ensuringthereisnothingbehindthemountingsurfacethatmay
bedamagedwhendrilling/cutting.
•Identifiedthecableconnectionsandroutethatthecableswilltake.
•Removedthemountingholecovers.
•Drilledoutthemountingholesontheunit.
58