Chapter 6: Adjusting Autopilot Settings 65
6 Adjusting Autopilot Settings
Calibration options: Types 150/150G & 400/400G
Calibration
setting
Vessel type
Factory default
Displacement
Semi Displacement
Planing
Stern drive (I/O)
Work boat
Sail boat
Your settings
Calibration lock 0 = OFF, 1 = ON
Vessel type 1 = DISPLACE, 2 = SEMI DISPLACE, 3 = PLANING, 4 = STERN DRV,
5 = WORK BOAT, 6 = SAIL BOAT
Drive type 3, 4, 5
Rudder alignment -7 to +7
Rudder limit 10 to 40
Rudder gain 1 to 9
Counter rudder 1 to 9
Rudder damping 1 to 9
AutoTrim 0 to 4
Response
1 to 9 (Type 150G/400G)
1 to 3 (Type 150/400)
Turn rate limit 1 to 30
Off course angle 15 to 40
AutoRelease OFF, ON
Wind Trim 1 to 9
Cruise speed 4 to 60
AutoAdapt OFF, nth, Sth
Latitude 0 to 80
Variation -30 to +30
81013_4.book Page 65 Wednesday, July 25, 2001 11:04 AM
To Next Page
Loading...
