Chapter 7: Maintenance and Problem Solving 7-3
Resetting the System
At power-on, the last-used values are retained for all the options, except for
those listed in the following table which are reset to the factory default each
time.
➤ To perform a factory reset:
1. Press
MENU.
2. Press the
SYSTEM SET UP soft key to display the System Set Up page (see
Section 5.3 for details).
3. Press and hold
MENU for 5 seconds.
A countdown timer is displayed. If you release the
MENU key before the
timer reaches zero, the reset is not performed.
When the reset request has been accepted, the system restarts.
The factory default settings are listed in Section 5.3
Table 7-1: Power On Default Settings
Item Power-on setting
Heading Mode
Rain
FTC
Alarm
Zoom
Windows
Lighting & contrast (mono
display)
Brightness (Color Display)
Head Up
OFF (but value stored) – radar only
OFF (but value stored) – radar only
ON, with last-used value
OFF
OFF
Lighting 40%, contrast 50%
ON at 100%.
To Next Page
Loading...
