3-22 SL70M & SL70C PLUS Pathfinder Radar Displays
Controlling Guard
Zone Alarms
• You turn the guard zone off
• You adjust the guard zone size/shape to reduce the number of targets in the
zone
• You turn the alarm off
• You decrease the alarm sensitivity
• The target leaves the guard zone
➤ To change the alarm sensitivity setting:
1. Press
MULTI to display the sliders.
SL70M
SL70C
2. Press the ALARM soft key to highlight the Alarm slider.
3. If required, press the soft key again to toggle the setting between
OFF and
ON. You can only move the slider if the control is set to ON.
4. Use the trackpad to increase or decrease the alarm slider setting. You can
press and hold the trackpad to change the value more rapidly.
5. The higher the setting, the more sensitive the alarm, and the smaller the tar-
get density required to set it off.
6. Press
ENTER to clear the slider display.
D3935-3
LIGHT CONTRASTALARM
ON
25%
TUNE
O
F
F
A
U
T
O
50%
D5036_1
ALARM
ON
25%
TUNE
A
U
T
O
LIGHT
75%
To Next Page
Loading...
