EasyManua.ls Logo

Raymarine SPX 10 - 3.4 Drive Unit and Clutch Setup

Raymarine SPX 10
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3: Installation 25
3.4 Drive unit
Various types of drive unit are available to match to your steering system:
Hydraulic pump - used to connect to hydraulic steering systems
Mechanical linear - used in sailing vessels, the mechanical linear drive moves the
rudder directly by pushing the tiller arm or a rudder quadrant.
Mechanical rotary - designed for power and sailboat systems that can be driven
from the helm position through a chain and sprocket e.g. cable and rod.
Refer to the following table for drive unit compatibility with the SPX SmartPilot.
SPX
SmartPilot
Supply
voltage
Drive unit compatibility
SPX 10 12 V or 24V All Raymarine Type-1 12 V or 24 V drives and pumps. Drive voltage
must be matched to boat’s supply voltage.
SPX 30 12 V or 24 V All Raymarine Type-1, Type-2 and Type-3 12 V and 24 V drives and
pumps. Drive voltage must be matched to boat’s supply voltage.
SPX
SOLENOID
12 V or 24 V All solenoid drives: Raymarine constant-running pump or similar.
D10451-1
Mechanical rotary
Mechanical linear
Hydraulic
87072-2.book Page 25 Thursday, November 22, 2007 8:43 AM

Other manuals for Raymarine SPX 10

Related product manuals