Raymarine SPX 10 - Page 41

Chapter 3: Installation 33
• Connect the other end of the SeaTalk
ng
cable into a T-piece connector on the
SeaTalk
ng
backbone cable or to a 3- or 5-way connector block.
.
Autopilot controller
• Connect the autopilot controller to the SeaTalk
ng
backbone cable or to an instru-
ment. (For detailed information refer to your autopilot controller installation guide
and the SeaTalk
ng
Reference Manual).
D10515-1
SeaTalk
ng
T piece
SeaTalk
ng
5 way connector
SeaTalk
ng
backbone
SeaTalk
ng
spur SeaTalk
ng
spur
D10419-1
ST70 controller ST70 controller ST70 instrument
SeaTalk
ng
T piece SeaTalk
ng
T piece
SeaTalk
ng
backboneSeaTalk
ng
backbone
SeaTalk
ng
spurSeaTalk
ng
spurSeaTalk
ng
spur
87072-2.book Page 33 Thursday, November 22, 2007 8:43 AM