Raymarine St290 - Connections to Spring Retention Connectors

6-2-6 Section 6: Installation
ST290 Instrument System Owner’s Handbook
Figure 2-4: Inserting wires in spade connectors
Connections to spring retention connectors
The DPU and transducer Pods use color-coded, spring retention
connectors for SeaTALK
2
connections. To make a secure connection to a
spring retention connector, prepare the cable for connection as shown in,
Figure 2-5 ,thenusethemethodillustratedinFigure 2-6 to connect each
wire.
Figure 2-5: Preparing cable for spring retention connectors
Figure 2-6: Connecting to spring retention connector
3 mm
D5906-1
SeaTALK
2
Red or Black wire
All other wires
50 mm
9 mm
D5905-1
9 mm
D5907-1
81183_2 S6.book Page 6 Wednesday, May 7, 2003 11:27 AM