Raymarine St290 - Advanced Calibration Options

Chapter 5: Adjusting Autopilot Settings 8-5-25
ST290 Instrument System Owner’s Handbook
Advanced Calibration options
Calibration setting Options Your settings
Calibration lock
OFF, ON
Vessel type
DISPLACEMENT, SEMI DISPLACEMENT, PLANING,
STERN DRIVE, WORK BOAT, SAIL BOAT
Drive type
MECHANICAL, HYDRAULIC, SOLENOID,
UNIVERSAL I/O, STANDARD I/O
Rudder offset
-7 to +7
Rudder limit
10 to 40
Rudder gain
1 to 9
Counter rudder
1 to 9
Rudder damping
1 to 9
Rudder trim
0 to 4
Response
1 to 9 (150G/400G)
1 to 3 (T150/T400)
Turn rate limit
1 to 30 (NOT Sailboat)
Off course angle
15 to 40
AutoRelease
OFF, ON (Sterndrive only)
AutoTack angle
30 to 125 (Sailboat only)
Gybe inhibit
OFF, ON (Sailboat only)
Wind mode
APPARENT, TRUE (Sailboat only)
WindTrim response
1 to 9 (Sailboat only)
Cruise speed
4 to 60
Turning error corr.
OFF, NORTH, SOUTH
Latitude
0 to 80
Autopilot reset
OFF, ON
81183_2 S8.book Page 25 Tuesday, May 6, 2003 9:08 AM