Pr e f ac e
iii
Pref ace
This handbook contains information on the operation and installation
of your new equipment. In order to obtain the best performance from
your autopilot, please read this handbook thoroughly.
How t his handbook is organised
This handbook is divided into the following chapters:
Chapter 1: Introduces the autopilot, its features and its use.
Chapter 2: Covers basic autopilot operation.
Chapter 3: Explains how to use Track and Vane (WindTrim) modes
and adjust autopilot performance, and summarises the ST4000 Plus
alarms.
Chapter 4: Explains how to use the CodeLock security feature.
Chapter 5: Provides details on how to make adjustments to customise
the autopilot to your particular vessel.
Chapter 6: Explains how to install your autopilot and its components.
Chapter 7: Covers functional testing and dockside procedures after
installation, and intial sea trials.
Chapter 8: Provides general maintenance procedures.
Chapter 9: Provides information to help you resolve any problems you
may encounter with your autopilot.
An index is included at the end of this handbook, followed by templates
for the installation of the control head, SeaTalk deck connector and
rudder reference transducer.
War rant y
To verify the ownership of your new autopilot, please take a few
minutes to complete the warranty card. It is important that you
complete the owner information and return the card to the factory to
receive full warranty benefits.
To Next Page
Loading...
