Chapter 5: Installing the ST4000+ 35
5 Installing the ST4000+
D5438-1
!
Stud (x2)
Thumb screw (x2)
Sun cover
Control unit and compass (all systems)
Control unit
M4 x
25 mm
screw
No8 x 3/4 in
screw (x4)
Spade
connector (x12)
Fluxgate compass
with 8 m (26 ft) cable
Also packed: Handbook, Quick Reference Card, Worldwide Distributor List
Compass
warning
label
Control unit terminal cover
(if desired, attach to rear of control unit
after connecting all cables)
Gasket
Control unit
power cable
1 m (3 ft 3 in)
D5437-1
Mounting
socket (D002)
Tiller
pin (D001)
Socket
Plug
Socket screw
No 4 x 3/4 in (x2)
Tiller drive
Tiller drive parts
Cable clip
and screw,
No 6 x 1/2 in
Optional: installation accessories if required
81131_7.book Page 35 Wednesday, March 17, 2004 3:59 PM
To Next Page
Loading...
