Calibration 35
Speed calibration
The speed calibration procedure involves carrying out two runs over a measured
distance, to enable a calibration factor to be determined and applied to your ST60
Tridata instrument, to ensure optimum accuracy. Each calibration run comprises
outward and return legs, to minimise the affect of tidal drift when the calibration
factor is determined.
speed
depth
Software
version
Instrument
status
(or NO for repeater)
(or NO for repeater)
Carry out speed calibration
as detailed in
Speed calibration - sheets 1 & 2
D4419-1
Intermediate calibration
depth
depth
depth
81040_5.book Page 35 Monday, February 20, 2006 2:39 PM
To Next Page
Loading...
