4 ST60 Graphic Display Commissioning Guide
What NMEA data is supported?
SeaTalk to NMEA 0183
Data from SeaTalk is transmitted to the NMEA OUT connector every
2 seconds. The supported NMEA output data is detailed in the following
table.
NMEA to SeaTalk
When certain NMEA data is available at the NMEA IN connector, it is
decoded and displayed by the ST60 Graphic Display. The supported NMEA
input data is detailed in the following table.
:
Data NMEA Header
Depth DBT
Heading, deviation and variation HDG
Magnetic heading HDM
Water temperature MTW
Wind speed and angle MWV
Water speed and heading VHW
Data NMEA Header
XTE, Waypoint identifier, Bearing & distance to waypoint APB
Bearing & distance to waypoint BWC
Bearing & distance to waypoint rhumb line BWR
Latitude and longitude GLL
Time, latitude, longitude, satellites tracked & HDOP GGA
Cross track error MWV or XTE
Navigational information RMB
Time, date, lat, long, COG & SOG RMC
COG and SOG VTG
81228_1.book Page 4 Wednesday, November 19, 2003 10:29 AM
To Next Page
Loading...
