Raymarine ST60 - 1.3 Chapters and Pages

8 ST60 Graphic Display Commissioning Guide
5. When you have set NMEA OUT and ALARM DRIVE as required, hold down
the and buttons for approximately 2 seconds to return to normal
operation.
Other User calibration functions
Comprehensive User calibration instructions are given in the ST60 Graphic
Display Operation Guide. You can:
• Set the Favorite page rollover period, or switch the rollover off.
• Switch chapter titles on or off.
• Set whether headings are displayed in true or magnetic form.
• Set the voltage at which a battery alarm will occur.
• Enable/disable individual local alarms.
• Set the date format.
• Set the time format.
or
track
reset
ON OFF
NMEA ON - Auxiliary Alarm drives not available
or
track
reset
ON OFF
or
track
reset
ON OFF
NMEA OFF - you can switch Auxiliary Alarm drive ON or OFF
D6545-1
81228_1.book Page 8 Wednesday, November 19, 2003 10:29 AM