Chapter 1: Operation 3
To display a particular page:
1. Refer to the
Chapter selection and content
diagram to determine the location
of the information you need (i.e. which chapter it is in), then press the key
the necessary number of times, to cycle to the required chapter. If the chapter
title facility is enabled (see
Chapter 4, Calibration
), the name of each chapter
is briefly displayed when it is first selected.
Note:
Although most chapter names are displayed in full, the Environment chapter is ab-
breviated to
ENVIRO
and the Autopilot chapter is abbreviated to
PILOT
.
2. With the appropriate chapter selected, use the key to select the required
page.
The manner in which information is accessed is illustrated in the following
example, which shows how to display true wind speed information.
Selecting chapter Selecting page
How to select a page
D4405_1
or wait for
2 second
time out
Either press
81039_4.book Page 3 Wednesday, March 24, 2004 3:14 PM
To Next Page
Loading...
